
Status Channel = 6 (Status Message)
Note: Each channel of these message types corresponds to a particular type of event. Because there are eight
channels, it is possible for multiple events to be reported in multiple channels in only one message.
(Example: The message “cccc 1555 5155 6” would indicate an AC loss and a Telco Fault)
Message Definition: Applies to:
Key Indicator: Account # = “0000” or “0001”
0000 5555 1555 6
Central Station Communications Failure
(Note, this may be received via the (800) Backup capability for
an AlarmNet-A receiver, or by the secondary C/S transceiver
for AlarmNet-M
A&M
0000 5555 3555 6
Central Station Communications Failure Restore A&M
0000 5515 5555 6
Central Station radio Poll timeout A
0000 5535 5555 6
Central Station radio Poll timeout restore A
0000 5551 5555 6
Central Station Power-on reset A&M
cccc 1555 5555 6
AC Power loss A/M/C
cccc 3555 5555 6
AC Power loss restore A/M/C
cccc 6555 5555 6
AC Power loss previously reported A/M/C
cccc 5155 5555 6
Low Battery
Note: This message indicates that the radio’s battery is low, not
that of the alarm control panel
A/M/C
cccc 5355 5555 6
Low Battery restore A/M/C
cccc 5655 5555 6
Low Battery previously reported A/M/C
cccc 5515 5555 6
Two-Way radio Poll timeout A
cccc 5551 5555 6
Power-on reset
A/M/C
cccc 5555 1555 6
Communications Failure A/M/C
cccc 5555 3555 6
Communications Failure restore A/M/C
cccc 5555 6555 6
Communications Failure previously reported A/M/C
Communications Failure Reminders A only
cccc 5555 5155 6
Telco line fault A/M/C
cccc 5555 5355 6
Telco line fault restore A/M/C
cccc 5555 5655 6
Telco line fault previously reported A/M/C
cccc 5555 5515 6
System Supervisory fault 7720ULF only
cccc 5555 5535 6
System Supervisory fault restore 7720ULF only
cccc 5555 5565 6
System Supervisory fault previously reported 7720ULF only
cccc 5555 5551 6
Walk test 7720ULF only
cccc 5555 5553 6
Walk test exit 7720ULF only
cccc 5353 5555 6
Exiting battery charge mode 7720V2 only
AlarmNet Messages Page 16
Kommentare zu diesen Handbüchern